Bushnell Trophy XLT Manuel d'utilisateur télécharger pdf (Page 8)

NECKSTRAP ATTACHMENT

Thread the ends of the neckstrap through the strap lugs on each side of the binocular, then back

through the plastic buckle. Adjust the position of the binoculars on your chest as they hang around

your neck to your preference by changing the length of the strap portion which passes through the lug

and buckle (by an equal amount on each side).

TRIPOD SOCKET

The 8x42, 10x42 and 12x50 Trophy XLTs are tripod adaptable. To attach one

of these models to a tripod or monopod, unscrew (counter-clockwise) the “B”

logo cap which covers the threaded socket inside the center hinge, and set it

aside in a safe place (the “B” cap is not removable on the smaller 28 and 32mm

models). Use a compatible binocular tripod adapter, such as the Bushnell model

#161001CM, (an accessory bracket, shown here, which attaches between the

binocular and tripod) to attach your Trophy XLT to any standard tripod in a

horizontal position to provide a stable image during prolonged viewing.

Note: The #161001CM does not allow the full range of hinge movement (IPD

adjustment) with the 12x50 model, therefore the Bushnell Universal Tripod

Adapter #19150 is recommended for the 12x50 Trophy XLT.

WATERPROOF / FOGPROOF

Your Bushnell Trophy XLT binocular has been designed and built utilizing the latest waterproof and

fogproof technology.

Binocular Tripod

Adapter (optional)

(Bushnell#161001CM)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Pas de commentaire

Bushnell Trophy XLT Manuel d'utilisateur Page 8